Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Siemens help

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #41394
    monkey
    Guest

    Hi all,
    can anybody help with identifying siemens cabinate configurations?

    Also what can you tell me anything about
    BTSM TEI and BTSM Signalling slot?
    regards Tony

    #41395
    KayDee
    Guest

    BTSM TIE(terminal endpoint identifier), as the abr says tie is normaly used as a way o addressing or diffrentiating beween all the sites in the BSC, it does the same thing as SALUNAME. for signaling slot it is time slot that the bts/bsc will use to communicate with the BSC/BTS, it must be the same as the one you set on the BSC side or else there will be no comms between the NE’s. as for cabinet config can you elaborate?

    #41396
    monkey
    Guest

    Hi KayDee,

    thanks for the information

    Could i send you a couple of picture of the 2 scrap cabinets that i have.This will be an easy way of identifying these cabinets?

    monkeymagic35@hotmail.co.uk

    Also do you have any documentation of Siemens Cabinets?

    regards Tony

    #41397
    KayDee
    Guest

    Yes you can send me the pictures. i’m not promising any thing but i’ll do my best

    dmanyuwa@gmail.com

    #41398
    Russ Hindman
    Guest

    Monkey email me and I can help you out. I also need BTS documentation for the Siemens, Ericsson and Nokia GSM bts.

Viewing 5 posts - 1 through 5 (of 5 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.