Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Ericsson RBS 200, 2000 & 2206

Viewing 15 posts - 31 through 45 (of 64 total)
1 2 3 4 5
  • Author
    Posts
  • 15th November 2006 at 07:16 #41234
    Mbongeni bhebhe
    Guest

    What is the difference between RBS200 and RBS2000

    15th November 2006 at 14:09 #41235
    malax
    Guest

    Does RBS 2207 support GPRS

    16th November 2006 at 05:26 #41236
    mohamed ibrahim amber
    Guest

    i would like to be explained to further about OMT ,creation of the IDB In the ericsson 2000 series.

    19th November 2006 at 08:53 #41237
    maria
    Guest

    is there any groups in yahoo that i can share RBS files

    22nd November 2006 at 13:58 #41238
    zaher
    Guest

    Hi Stuart,

    I’d like to know about RBS-200
    like what is subrack,TRXD (TRX magazine)

    thanx/zaher

    28th November 2006 at 08:17 #41239
    godfrey Tshiamo
    Guest

    how can i intergrate Ericsson DXX into a network system of RBS 2202 & 2206

    28th November 2006 at 19:42 #41240
    arman
    Guest

    in ericsson RBS2206 where is combiner unit.how much power that ericsson 2206 consume

    20th December 2006 at 15:21 #41241
    thiru
    Guest

    Hello sir,
    I like to know the basic structure and technical details of the bts 2000 series and also about the minilink E network.
    also pl explain me the streams used and the capacities of channels and streams.

    thanks & regards

    31st December 2006 at 12:13 #41242
    aditya
    Guest

    hi everybody

    plz guide me,
    my doubts are
    1)how patching is done.
    2)detail of all the 2000 series rbs
    of ericsson, also nokia rbs.
    3)integration and comissioning
    problems

    3rd January 2007 at 03:35 #41243
    Ivan Boyd
    Guest

    I am asking about rbs 2206 compared to rbs 2202
    In rbs 2202, if the config is more than 2/2/2, then the cdu of several rbs must be interconnected by using jumper.
    How about rbs 2206? Should it use jumper to interconnect more than one rbs if the config is more than 4/4/4?

    In using OMT software, do you know what TEI stands for? what value should I fill?
    I have seen some guys use 62. what does it means?

    4th January 2007 at 08:10 #41244
    aditya
    Guest

    hello sir(stuart)

    plz guide me,
    my doubts are
    1)how patching is done.
    2)detail of all the 2000 series rbs
    of ericsson, also nokia rbs.
    3)integration and comissioning
    problems

    10th January 2007 at 08:29 #41245
    vyas
    Guest

    hi i am working as transmission engineer.can i know about Ericsson minilink traffic node

    15th January 2007 at 06:24 #41246
    Tech
    Guest

    i need information with the hardware and fault finding side of eircssons RBS 2202 & 2206. if anyone can help me out with this.
    Thanx.

    16th January 2007 at 07:45 #41247
    godfrey Tshiamo
    Guest

    hi stuart

    I have a problem which with RBS 2206 on one particular site,when the site goes down due to power failure,when power restores the site does not restore automatically even if the link is fine.The site has a tower mounted amplifier.

    16th January 2007 at 08:25 #41248
    waleed
    Guest

    hi stiuart, about your problem you did not mention if the bt 2206 does not back up as software problem or still dead due to power problem,in last case check the ECU may be need change.

  • Author
    Posts
Viewing 15 posts - 31 through 45 (of 64 total)
1 2 3 4 5
  • The forum ‘Telecom Design’ is closed to new topics and replies.