Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Ericsson RBS 200, 2000 & 2206

Viewing 15 posts - 16 through 30 (of 64 total)
  • Author
    Posts
  • #41219
    praveenbhasin
    Guest

    If anyone requires the process for energy savings by pcm kindly get in touch.

    #41220
    roberto
    Guest

    hey stuart .i d like to know the procedure to install and verification of the rbs 2206 2207 thank´s from roberto e-mail semeraro222@hotmail.com

    #41221
    sandeep
    Guest

    Hi stuart,

    I like to know the basics of BTS installation of ericsson

    Thanks for your help

    #41222
    chandan debnath
    Guest

    hi stuart,
    suppose i am expanding the site
    with 4+5+6 configuration with two RBS 2206.PLS tell me the hardware configuration between two bts’s.

    with regards,
    chandan debnath

    #41223
    David
    Guest

    I was wondering how different the command structure is for GSm from the 882/884 equipment, also I do not have any experiance with the GSM D.T. do you know where I could find information on the command structure?
    Thank you for your time

    #41224
    JAKES
    Guest

    IS THERE SOMEONE THAT CAN HELP ME WITH THE BASIC SETUP OF THE RBS200, I AM STUDYING COMMUNICATION TECHNOLOGY AND DOING THE RBS200 AS A PROJECT

    #41225
    al noumani
    Guest

    Good Mooring

    How to connct this configurtion 10/8/6
    in RBS2206.

    please help my

    #41226
    Kiptoo
    Guest

    i eargurly want to be informed about ERICSSON RBS 2106 configurations

    #41227
    Ernest kompani
    Guest

    Hello
    I like to know the configution and maintenance
    for rbs 2207 and 2206

    #41228
    GEET MUKHRA
    Guest

    Hi al noumani

    Its not possible as you can use 12/6/6 confg.only at max using 2 RBS 2206..If anyone knows about this then do reply.

    Regards

    Geet Mukhra

    #41229
    GEET MUKHRA
    Guest

    Hi chandan debnath
    Use two cells in first RBS 2206 with tie values 0,1,2,3,4,5 in cell A and 6,7,8,9,10,11 in cell B.
    Use third cell in second RBS 2206 at tie value 0,1,2,3,4,5.
    You will require 9 DTRUs in all.
    Now just defined the required tie values from OMCR as per you configuration.
    As per your requirment following tie values will be used..
    cell A 0,1,2,3
    cell B 6,7,8,9,10
    cell C 0,1,2,3,4,5

    Regards
    Geet Mukhra

    #41230
    Michael
    Guest

    Hi Noumani,
    you can achieve the 10/8/6 config with three 2206 cabinet ;
    cabinet 1 will take care of the sector with 10trxs and a cdu-f combiner will be ideal, the IDB will be configured for 1*12 but ties 10&11 will be deactivated
    Cabinet 2 will take care of the sector with 8trxs again cdu-f combiner is used and the IDB is configured for 8+4 only the first two combiners will be used hence ties 8,9,10,11 is deactivated
    Cabinet 3 will take care of the sector will 6trxs likewise cdu-f is used but the IDB is defined for 2*6 or still 8+4 and the used tie positions deactivated.You can refer to me further clarifications

    br.
    Michael

    #41231
    Maher
    Guest

    Hello All.
    Please,If anyone have information or help with the hardware and fault finding side of Ericssons RBS200, 2000 & 2206 series of BTS’s. i hope to to hear from u soon.
    thx all

    #41232
    mis
    Guest

    Hi stuart,

    I like to know the basics of BTS installation of ericsson, motorola….

    Could you pls tell me how much is the power consumption of RBS2206? How much is heat dissipation of RBS2206?
    and if have information or help with the hardware and fault finding side of Ericssons RBS200, 2000 & 2206 series of BTS’s.

    i hope to to hear from u soon.

    thanks and regards
    mis

    #41233
    suresh
    Guest

    Hai
    what is the difference b/w combinders CDU C,D,J and G…
    one Ericsson Radio at a time can carries how many E1…

Viewing 15 posts - 16 through 30 (of 64 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.