- This topic has 63 replies, 1 voice, and was last updated 5 months, 4 weeks ago by Given Nxundu.
3rd June 2005 at 01:07 #41204StuartGuest
If anyone requires information or help with the hardware and fault finding side of Ericssons RBS200, 2000 & 2206 series of BTS’s.
Please send me a message and I will try to help you out.
I have had over 6 years working with the installation, commisioning and testing of this equipment. My work collegues have also had many more years experience with this equipment.6th June 2005 at 10:01 #41205senthilGuest
I like to know the basics of BTS installation of ericsson, motorola….
thanks and regards
senthil6th June 2005 at 16:14 #41206Owain ColeGuest
I’m interested in modelling Ericsson RBSs and I have a specific question.
I understand that you can chain RBS cabinates together such that the traffic from one cab is passed through to the transmission of the next.
However some of our users think that the ingress and egress 64k timeslots must be the same if the cabinate is in the 2000 series, but they can be different in the 200 series.
For example, can an RBS 2000 take traffic in on timeslot 5, but put that traffic out on timeslot 6.
Is this restriction true for 200 series? 2000 series? 2600 series?
I’d be very interested to here all about this.
Owain Cole12th June 2005 at 19:49 #41207SaidooooGuest
my question when i create DT for Ericsson RBS i want to know which softwear suitable & conficration for each type Ericsson RBS
for example RBS2206 conf. 2/2/2 softwear will be SWVER=B0531R090313th June 2005 at 06:36 #41208jackGuest
Could you pls tell me how much is the power consumption of RBS2206? How much is heat dissipation of RBS2206?
thanks14th June 2005 at 17:33 #41209timwGuest
I may have some work for you regarding installation of RBS’s.
Please contact me.
Tim3rd August 2005 at 10:51 #41210HerbertGuest
Hi to all
I have a question for you?
When will i used the Y-link cable for RBS 2202, If the configuration is 2+2+2, 3+3+3, 4+4+4. is that correct. If 5+5+5 means all cabinets are configured as master does it really means no bus cable and Y-link cable to used.
If im going to used Y-link which side to used the longer cable?
do you have wiring for this set-up
Please help im confused on this.
Thanks for your help3rd August 2005 at 15:42 #41211tarun takkarGuest
I like to know the basics of BTS installation of ericsson11th August 2005 at 11:54 #41212ibeachu chrisGuest
please can i know the command to get which RBLT number (from the bsc) is tied to a particular site.11th August 2005 at 11:57 #41213JohnGuest
WILL GIVE tg NUMBER13th August 2005 at 06:04 #41214chrisGuest
Hi john, i already know of the command you have there.i mean for example, if RBLT10 is connected to siteA and i don’t know the TG No, which command can i use to know the RBLT Number connected to that site.13th August 2005 at 13:34 #41215JohnGuest
So you know the site number
use RXTCP to get the tg number then RXAPP:MO=RXOTG-X;
will give the RBLT range this will allow you to see the DIP number25th August 2005 at 08:12 #41216praveen bhasinGuest
Could you pls tell me how much is the power consumption of RBS2206? How much is heat dissipation of RBS2206?26th August 2005 at 16:41 #41217saleemGuest26th August 2005 at 19:39 #41218Muhammad AliGuest
i am student of MSc Mobile Communciation can i get the manuals for Cell Planning and Optmization and also the installation manuals of Ericssons RBS200, 2000 & 2206 series of BTS’s on my email address firstname.lastname@example.org