Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

HO in MSC

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #41083
    kat
    Guest

    I am not able to understand this; while performing HO, why GSW is making unidirectional connection when MSC receives the HO request message?

    Only after receiving the HO detect / HO complete message it makes bidirectional connection.

    thanks
    -kat

    #41084
    suchit
    Guest

    hi all

    here is a strange case to me. i am trying to perform a inter MSC handover. both MSC are having different network. when the call is initiated in network-B , HO to network-A and subs-HO back to network-B is successful. but if the call is initiated in network-A, then handover to network B is not possible. MSC-B sends HO_DETECT and the MS sends an MS_ACCESS to new BTS , but after that it stays back with the old TCH seneind protocol error(ERROR-111).
    has anyone faces this kind of situation. please guide me.

    regards

    Suchit

    #41085
    Alex
    Guest

    can anyone tell how to do call path tracing

    #41086
    HOUSSEM
    Guest

    Hi alex you can use this commande to trace call path:

    Call Path Tracing, Initiate(CTRAI)

    for exemple
    CTRAI:MSISDN=5144774100;
    or

    CTRAI:IMSI=12652239;
    FOR MORE DETAIL REFAIRE TO alex library

Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.