Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

RA update

  • This topic has 2 replies, 1 voice, and was last updated 19 years ago by free_lo.
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #40950
    free_lo
    Guest

    Hello..
    Does anyone involve an SCCP Relay node for LU in a multiple HLR network?

    #40951
    Scot
    Guest

    Hi Free Lo,

    Can you explain the concept ?

    Rgds

    #40952
    free_lo
    Guest

    Hello Scot

    As you may know for LU (location update) in a 2G network, the VLR asks the HLR for subs data and the request is IMSI based.
    In case there is more than one HLR, the operator has to split the IMSI ranges to point to the specific HLR.This brings some complications such as arrangements with the SIM card vendor on the IMSI ranges to use, spare SIMs in the shops for SIM replacements etc.
    In order to prevent all this it is possible to put a SCCP Relay node in order to route the LU update requests to the proper HLR.
    The SCCP Relay node is the database which contains IMSI/MSISDN pairs and the operator now can allocate MSISDN ranges to the HLRs and not IMSI ranges.
    Now…is it possible to use the same SCCP Relay node to route RA update requests to the right HLR?
    Is the RA update the same as LU update?

Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.