Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

interface Abis and Ater

Viewing 15 posts - 31 through 45 (of 65 total)
  • Author
    Posts
  • #40877
    Rohan
    Guest

    What is the max. number calls that ATER can carry? and how?

    #40878
    deepak
    Guest

    can u explan about erlangs

    #40879
    ASHU
    Guest

    HI VIPUL YOU HAVE WRITTEN 1ATER=1E1 BUT WRITE ANSWER IS 1ATER=E1

    #40880
    ASHU
    Guest

    SORRYYYY 1ATER=4E1

    #40881
    Anuj Kumar Bajpai
    Guest

    How many TRX is supported by 2mbps of E1 and How E1(2MBPS)mapping is possible at air interface….

    #40882
    Kamal Kotecha
    Guest

    upto 13 trx can be supported in one E1…

    As per nokia is concern…

    Otherwise it depends on RSL multiplexing…

    #40883
    typhoon
    Guest

    hi,

    anyone plz tel me in an ater how many fault management links can we have?

    Regards,
    typhoon

    #40884
    typhoon
    Guest

    hi Ashu

    1 A-interface= 4E1
    while

    1Ater=1E1

    #40885
    Zyoti
    Guest

    hi ater related person,

    here i found all r fighting about that 1 ater= ? E1 , actually 1 ater = one e1 physically, if take logically 1ater=4 E1 .i.e ater is used for multiplexing.. i.e resource saing so if we use direct A interface as the link between bsc and msc then we need one E1 for one A link , ater provides 4:1 multiplexing that physically one E1= one ater = one A interface…
    hope now everyone is clear..

    #40886
    NITIN
    Guest

    Hi,

    CAN SOMEBODY TELL ME ABOUT SDH AND PDH LINK…IN WHICH COND. OR WHERE IN NETWORK WE USE SDH LINK OR PDH LINK…………

    #40887
    GortWeessebow
    Guest

    Welcome for everyone, I’m new here. Thankyou for being a part of such nice community. Cya. 🙂

    #40888
    tarun bedi
    Guest

    earlang is traffic handling capacity or say its unit of traffic . and i earlang is no of calls *no of minutes.

    #40889
    Pix
    Guest

    Erlang is not *only* capacit. It is also used to represent the quantity of traffic actually carried by the system.

    It is = nb of calls * minutes… why wouldn’t it be ? 🙂

    #40890
    ASHUTOSH DWIVEDI
    Guest

    WHY 1ATER=4E1 ????????????

    #40891
    AHMED
    Guest

    WHAT IS THE DIFFRENCE B/W ATER AND ABIS INTERFACES

Viewing 15 posts - 31 through 45 (of 65 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.