- This topic is empty.
5th April 2005 at 10:56 #40801FrankGuest
I’m confused about the following:
where ever you read about traffic engineering (even in some earlier postings here) you find the following formula:
BHCA=(Traffic in Erlang)*3600/MHT
BHCA = Busy Hour Call Attempts
MHT = Mean Holding Time.
As far as I understand ITU-T E.600 says that “Traffic offered” is the superset of all traffic that arrives at a resource, including “Traffic Carried” by the resource and “Overflow traffic”.
What is confusing me now is the exact meaning of “Traffic in Erlang” in the context of the above formula. As far as I understand, it can only be “Traffic Offered” because this is the superset of “Traffic” including both successful and unsuccessful seizures, just like BHCA is defined (BHCA is related to ALL call attempts, no matter whether they are successful or not). If I wanted to take a look at successful seizures, I wouldn’t calculate BHCA but BHCC (Busy Hour Call Completions).
So if I use the Formula at the top of this posting for calculating BHCA, I have to enter “Traffic Offered” as a value for “Traffic in Erlangs”.
Usually, network operators calculate with an average traffic value per subscriber (e.g 0.1 Erl is a typical value for one PSTN subscriber to calculate with) when they do network engineering. But as far as I understand, this per-subscriber-value relates to “Traffic Carried” (because it’s calculated by active connection hours) and includes both outbound AND inbound traffic of a subscriber. So this would not be a value that could be used to calculate BHCA if you don’t divide it by 2 (to separate between incoming and outgoing traffic) and multiply it with a blocking factor.
So how do I calculate a true BHCA if I only have “Traffic Carried”?
Thanks in advance
Frank5th April 2005 at 11:53 #40802dmckGuest
I agree with your logic. I dont believe you can calculate BHCA from carried traffic. You must either measure it or estimate it. You can estimate it by ‘knowing’ the GOS for the route and dividing into the BHCC. This assumes your GOS figure is accurate!26th May 2011 at 07:59 #40803mayankGuest
ya you are rite
Traffic in Er is calculated by call occupied not by call attampet2nd December 2013 at 19:07 #40804Jingtao LiuGuest
About BHCA Formal, If we want put ASR in denominator. it is right on not. if it is not true. how can prove or find some doc to prove it is mistake.10th March 2014 at 11:22 #40805jitendraGuest
Estimated Busy Hours Traffic Erl=BHCA*Call Duration/3600
Where Call Duration=60 sec
So u can find the
BHCA=Traffic in Busy Houre*60 @ 2%
this are only estimation of BHCA
OR it can be found using million Lines , no of user & their avg erl used to estimate busy Houre traffic & thus BHCA.27th June 2014 at 03:59 #40806EfrenGuest
How do we compute the traffic if you have several calls of different durations? For example, in one BH i have 10 calls at 5-min then 20 calls at 2.5 min… what is my traffic then in Erlangs?