Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

UMTS KPI

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #40400
    Mohsin Ismail
    Guest

    Hi All

    Thus anyone here has been roll out UMTS(3G)?. If yes, i supposed GOS and QOS for KPI has been set. So, appreaciate if you can share with us the parameter,index, and target used to achive the good network quality. Possible if the KPI for the Core network either CS or PS, but if you can give and provide the WCDMA KPI, is very helpful.

    Thank you and regards
    Mohsin

    #40401
    varun sharma
    Guest

    Hi Mohsin,
    KPI parameters of 3G are following
    1.RRC setup attempt
    2.RRC failure and drop
    3.RAB CS voice failure and drop
    4.RAB data failure and drop
    5.HSDPA RL failures and drops
    6.SHo, ISHO and IFHO failures
    7.EDCH estab failre rate and EDCH abnormal release rate

    #40402
    vinnod kumar yadav
    Guest

    Hi All,

    Can anyone please guide me about one particular scenario, where all the RRC states( Idle, CellFfACH, Cell DCH, URA PCH, CELL PCH) comes into effect stepwise (in any random order)

    Thanks

Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.