Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

APG40+WINFIOL

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #40376
    sabri
    Guest

    HI,

    Some can help me with some informations about how to use winfiol with the APG40 and the commands that are supported.

    Thanks.

    #40377
    waleed
    Guest

    you must install the alex library,you must ask for them from ericsson as you are operator using ericsson equipment

    #40378
    Scot
    Guest

    Hi Sabri,

    WINFIOL Look will be same as before but with small chnages.

    You have to give IP Address and Port Address instead of the COM Port Address.

    And APG40 is same as WINNT with some APG Specific SW.So you have to use both commands.

    There are lot commands.
    I can give some commands.

    Rgds

    scorplund1976@yahoo.com

    #40379
    sharad
    Guest

    please help me in axe-810 with some documents and printouts

    my email is : bhatt_sharad123@yahoo.com

    #40380
    laione
    Guest

    i am using winfiol as a programming tool every day as i am programmer in Telecom Fiji.

    Looking forward to your assistance.

    #40381
    SJP
    Guest

    Could somebody help me configure the DDE interface so that the alarms that I get on the WINFIOL window of Alarm terminal, can be associated with playing of different audio files(wav).

    thanks,
    sjp

Viewing 6 posts - 1 through 6 (of 6 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.