Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

BTS

  • This topic is empty.
Viewing 15 posts - 286 through 300 (of 469 total)
  • Author
    Posts
  • #39470
    HAMID
    Guest

    I HAVE INFORMATION ABOUT TEMS AND ANATHER MATERIAL IS NEED

    #39471
    bran
    Guest

    hi
    please tell me the commands to be used in bsc to chk EDAP,TRXSIG,OMUSIG & TCH

    #39472
    Pexi
    Guest

    What issues can cause following alarm on Nokia Ultra Site? – Traffic channel activation failure

    Thanks in advance.

    #39473
    Ashwin
    Guest

    PCMs or Phase Change Materials are used in B. T. Shelters in a few diferent ways. They can be encapsulated in Aluminum or Polymer Profiles. Compact or
    Wall-hanging models are available. It is called Advanced Thermal Management system. The matter is sumarrised as under:
    1. Back-up to air conditioning in case of power failure.
    2. Free cooling with-out air conditioning and maintaining the Shelter temperature at less than 35C or 40C etc.
    3. Latest-PCM is offering trials for PCM based back-up for eliminating diesel generator in case of power failure. You will find a write up on PCMs for BTS (B. t. Shelter) at pcmenergy.com
    4. In India PCMs are extensively used in Airtel (Bharti) shelters. Tatas are in a trial stage and Reliance may follow the suit.

    #39474
    kwadjo asante
    Guest

    hi all of u! everybody is always talking about GSM stuff. No one working on CDMA?

    #39475
    vetri
    Guest

    Hi guys can somebody help me out with GLCK calibration in motorola Horizon 2 macro.

    #39476
    pravin sharma
    Guest

    hi,to all of u? we use the IF Cable in installation.what frequency range of this IF cable,or it is constant,it is fixed for all operators or differenet?

    #39477
    Ashwini
    Guest

    Hi all
    I am new to alcatel BTSs can any one share their views abt it.

    Thank you

    #39478
    shaleen srivastava
    Guest

    Bran the commands of NOKIA Bsc are
    for:
    EDAP : ZESI;
    TRXSIG : ZDTI:::PCM=”ET”;
    OMU can also be checked from the above command
    and for Tch u can check from
    ZERO:BTS or BCF No=” “;

    shaleen
    HUGHES
    hssworld.com

    #39479
    Pix
    Guest

    Hi Ashwini
    I’m radio engineer on Alcatel BSS, planning and optimization.

    #39480
    Ashwini
    Guest

    Hi Pix
    Do u hav knowledge abt Alcatel 9100, MFS 9125
    Also Can u explain to me how the call is flow in case of the BTS w.r.t to TRE and antenna

    Awaiting ur reply

    #39481
    Ravindra
    Guest

    I have some questions regarding NOKIA BTS?
    1. Each trx power with and without combiner?
    2.What is BCF and OMU and its functions,

    #39482
    shaleen
    Guest

    hi ravindra

    the trans. power is 44 Dbm with combiner and 47 dbm without combiner

    and
    the bcf is terminology which represents the different BTS or sector

    the OMU signalling is responsible for carrying the alarms
    its main important function is to initialize the BTS and configure it.

    another important function of OMU sig is that it keep on interacting with the hardware of BTS and ckeck there status

    #39483
    vikas jain & Rajesh dangi
    Guest

    can u plz tell me abt call routing in BTS and Bsc

    #39484
    MOAN
    Guest

    Halo ALL…
    My name is MOAN, I use to work with installing RF for Indoor Coverage, Integrate BTS and Commisioning BTS ULTRASITE and METROSITE. I can Upgrade, Downgrade and Activate BIAS-T for NOKIA ULTRASITE BTS.
    I try to look for a new job for Installation BTS for NOKIA Product, because my old company is close.
    Thank’s.

    Ps. For everyone hwo get trouble with Alarm 7604 Rx level divert to much……, just ask the OMC to reset the OMU. I hope it can clear the Alarm

Viewing 15 posts - 286 through 300 (of 469 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.