Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Local vs Roaming Routing (IN)

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • #38525
    Raool
    Guest

    I wud like to generate IN triggers for local MT calls to one SCP and
    roaming MT calls to another SCP.
    So say when the person is in his own network. any calls to him are triggered to SCP (say A) and when he roams outside the n/w, the triggers are sent to SCP (say B)
    I know this can be done, but how !!
    Is this something to do with HLR profiles ?

    Can some dude throw some light on this ?

    cya
    -R

    #38526
    S.Vijay
    Guest

    Interesting Topic…..

    Are you using INAP or CAP ( CAMEL ) for SCP Communication.

    Rgds

    #38527
    Raool
    Guest

    i zhink it shdn’t matter
    whether its INAP /CAMEL.
    But me plan to use INAP.

    #38528
    Kiran
    Guest

    In INAP it is not possible to allow roaming triggers enabled.. unless both the networks are of same type ie., having same branded switches and same operators.

    Even though if u want to get the (profile) information (from HLR) to you system for each subscriber you should query the HLR with an update location Map queary and be shure that you cancel the query with out commiting (Commiting = sending update location end) at the last.

    #38529
    Hari
    Guest

    Hello Raool,

    Could you let me know why? you think there is need for such requirement?.

    Hari

    #38530
    Daniel Dong
    Guest

    what’s the defferences between INAP and CAP?

    who can give me a example about INAP or CAP? with AXE10 commands is better

    #38531
    S.Vijay
    Guest

    INAP and CAP Both are Used for IN-Application.

    INAP-Protocal has differnt versions.Even each Vendor has their own version with PARAMETERS they use it for their equipments.

    CAP-Standard for IN.Can be supported by all Vendors.
    Prepaid Roaming is easier than INAP.

    in AXE10 There is no differnt commands.All the commands are related for SSF Functionality only.SSF Can use any protocal-INAP/CAP like a PARAMETER Having Different Values.But AXE Needs the specific SW for using either INAP/CAP or Both.

    Rgds

    #38532
    Wallis Dudhnath
    Guest

    During the very late 1990s there was an initiative to drive
    VHE/OSA – Virtual Home Environment and Open Service Architecture.

    At that time IN – Intelligent Network – Services were proving popular and there was a need to see if these Services (Charging/Prepaid, VPN,
    Number Translation, etc..) can be used in the VPLMN. To help, Network Features were standardised by 3GPP for CAMEL – Customised Application Mobile Enhanced Logic. This led to MAP V3 (and onwards)and CAP V2 (and onwards up to CAP V4). This allowed the home gsmSCF tobe used by the VLPMN. As CAMEL is standardised it promotes interoperability
    between different gsmSSF, gprsSSF, gsmSCF, gsmSCF, IP, etc..

    If the gsmSCF and the Networks are from the same vendor
    then it is possible to triger to different SCPs based on if they are in the HPLMN or the VPLMN

Viewing 8 posts - 1 through 8 (of 8 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.