Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

RF Loop test failure

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #38470
    Vijayaraj
    Guest

    When Rf Loop test failure Alram arises?Why TRU gets blocked in Ericsson RBS 2202?

    #38471
    Zalameh
    Guest

    Dear Vijayaraj,

    As i know, this alarm may arise when the PCM synchronization for the site is not OK (bad quality Transmission..). The loop test is between the BTS and the transcoder (TRAU) which needs that the BTS is well synchronized with the TRAU.

    By the way, Vijayaraj what is you working specialty in GSM (BSS,NSS), do you have Ericsson experience?

    I hope this helps..
    Regards.

    #38472
    Partha
    Guest

    Hi Zalameh,
    Thanks for the info.On behalf of Vijayaraj, he is BSS Engineer.Has rich experience in Nokia,Ericsson BTS.

    #38473
    vijayaraj
    Guest

    Thanks Zalameh.partha!u r fast…

    #38474
    Jamack
    Guest

    I am looking for some quantities of the RBS2202, older version, for rural areas. these are hard to find in A5/2. Do any of you have any surplus?

    #38475
    naim ahmed
    Guest

    In single Sec RF loop test fail, two are working fine in BTS 2964 ERICSSON

Viewing 6 posts - 1 through 6 (of 6 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.