Generic selectors
Exact matches only
Search in title
Search in content

Reply To: GSM DTX UL/DL measurements


hi hendrik,

UL DTX cannot affect DL Quality (sub or full)
DL DTX affect DL Quality full but not DL Quality Sub.

Are the two last measurements show rxqual dl = 7 ?
Is it more than 2 measurements or less ?

I would say that the Bad Quality in DL caused the HO to be triggered. Is the HO COMMAND (layer 3) is received before the QUAL=7 or after ?

Please check your Qos stats : HO DL Quality Rate. Is it high ? (> 30%)

Are there a lot of drops ?

a drive test mobile would actually give you more than the rxqual : it will also show the BER. If you can find it, then what’s its value ?