hi,
HR is good when TFO is enabled.
otherwise it is bad.
try it.
there is no operator in the world that is using AMR WB, so you’ll be the first ! rock n roll !
EN_TFO_OPT = Disable –> this avoids going back to FR when the call was started in HR, after a HO to a cell which is in lowload.
FORCE_TFO_VS_AMR = 0 –> DISABLE. It means that if a call is in AMR, TFO is disabled.
If FORCE_TFO_VS_AMR = Enable, then a call in AMR will stop AMR in order to enjoy TFO.
cheers
pix