Generic selectors
Exact matches only
Search in title
Search in content
Search in posts
Search in pages

Reply To: 2g huawei

#63412
Bijoy
Guest

Hi
My apologies for delayed response.

Huawei II Power control is based on MR compensation, prediction filtering and adjusting the power step based on the receive level/quality
1. Power control based on the receive level

If UL/DL RX_LEV Upper Threshold < UL/DL receive level < UL/DL RX_LEV Lower Threshold, power control is not required. If the condition is not met, power control is required. If the receive level is less than UL/DL RX_LEV Lower Threshold, the power needs to be increased. Power increment = (upper threshold + lower threshold)/2 – receive level. If the value exceeds the value of MAX Up Adj. PC Value by RX_LEV, take the value of MAX Up Adj. PC Value by RX_LEV instead.If the receive level is greater than UL/DL RX_LEV Upper Threshold, the power needs to be decreased. Power decrement = receive level – (upper threshold + lower threshold)/2. 2. Power control based on the receive quality If UL/DL Qual Upper Threshold < UL/DL receive quality < UL/DL Qual Lower Threshold, power control is not required. If the condition is not met, power control is required.If the receive quality is equal to or greater than UL/DL Qual Lower Threshold, the power needs to be increased. Power increment = MAX Up Adj. PC Value by Qual.If the receive quality is less than UL/DL Qual.Upper Threshold, the power needs to be decreased. Power decrement = MAX Down Adj. PC Value by Qual. Br\\ Bijoy