Generic selectors
Exact matches only
Search in title
Search in content

Reply To: DX200 Messages


Hi Kamal,

the service terminal was started on the active MCMU of a BSC with MML command ZDDS:MCMU,0.

In the service terminal I used the commands

ZOEBF clear the monitoring buffer
ZOEQ destroy the monitoring buffer
ZOEBR::3FFFFF,0 set buffer size
ZOEC::SR:(NUM=9389) monitor message 9389
ZOEM start monitoring
ZOES stop monitoring after 10 min
ZOEG generate the output

Kind Regards