Generic selectors
Exact matches only
Search in title
Search in content
Search in posts
Search in pages

Reply To: SDCCH HO



Same causes than TCH HO, using same parameters.

Basically, all standard causes are available (quality, level, distance, pbgt). I usually don’t recommend to activate it, but you can give it a try.

Don’t forget that the HO algorithms can be checked only when the averaging windows are filled with values.

Ex: A LEV HO = 4, you need at least 4 SACCH measurements before the HO “bad level” Detection can occur. If the SDCCH phase last 3 seconds, for the 2 first seconds, HO LEVEL cannot be detected.