Generic selectors
Exact matches only
Search in title
Search in content

Reply To: How to know that SLS value use which SLC

#56753
Pan
Guest

Hello, Don!
Load Sharing Algorithm is defined for SLC within a single Link Set. I don’t know about link code priority in siemens. There is only signalling route priority when you want to configure load sharing between Link Sets rather than Link Codes within a Link Set.
In Siemens I can can configure a Load sharing between link codes within a single Link Set by means of parameter Load Sharing Algorithm (LSA), which indicated what bits of SLS (4-bits) is used for loadsharing. For example, if LSA=0 – no loadsh, is LSA=1(0001)- only first bit of SLS is used for loadsh between two SLC, if LSA=2(0010)-only sesecond bit is used for loadsh between two SLC, if LSA=3 (0011) – the first 2 bits are used for loadsh between 4 SLC…. if LSA=15(1111) – all for bits of SLS are used for loadsh between all SLC of Link Set.
With BR, Pan