AKKI,
1. Type of RBS you can find by rxmfp:mo=rxocf-xxx, in answer printout will be ROJ of DXU; mo=rxotrx-xxx, – ROJ of tru/dtru. This info can help you identify your hardware.
2. reset the “AP fault” alarm:
aploc;
alist
acease xxx – where xxx is Alarm Identifier in alist-printout.
But, many alarms can’t be ceased, like MIRRORED DISKS NOT REDUNDANT or General Error. You must follow OPI in Alex to resolve problem.
3.find the alarm history of the site.
allip;
4. reset the history alarm
history can’t be resetting by one command, only by resolving every alarms history will be cleared
5.To reset the “size alteration” alarm:
dbtsp:tab=saactions;
saaii:sae=xxx[block=yyy],ni=zzz;
where xxx,yyy – in answer printout from dbtsp…
NI= old ni+15-20% (by practice)
besides – see Alex, many sae is hardware dependent, and many is turn to another sae.
5.To reset the “Digital path fault Supervision” Alarm
if dip no more used, you can blocked’em :
dtbli:dip=…;
if else, trouble must transmit to transport department.
6.To reset the “CP Fault” Alarm
CP fault alarm – handling only by Alex OPI, because wrong operation may lead to CP restart or system halted. In many cases CP fault arise by hardware fault (you must change card in CP-magazine).
this is my experience job only in GSM..
regards