Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Reply To: BER-FER-RxQual

#56429
pix
Guest

hi,

the ul rxqual is measured by the BTS, and sent to the BSC/MFS only if NC2 is activated.

as far as i know, the RXQUAL collected statistically by the BSS are only coming from voice calls, not from packet transfers.

during drive test, you can NEVER know about the UL link (rxlev ul, rxqual ul, etc) unless you set up your OMCR so that it collect UL information for the drivetest IMSI.
this way, after the trace, you can aggregate DL measurements from the DT tool and UL measurements from the OMCR trace.

regards.
pix