26th April 2004 at 19:51
#37881
Muzi
Guest
Direct Retry issue—
1.Is it possible to activate the DR PARAMETER when you have only one TRX?
2.I saw one incident which makes sense because the cell is busy(high call volume,close to congestion)where we added another trx(capacity),the second SDCCH and activated direct retry.This causes confusion because the initial matter=site with LOW call volume,but it is congesting
3.What causes “outgoing intra-cell bsc handopver success rate” poor on two adjacent cells of the same site,e.g.sector1&2.=what could be wrong in this issue.