hmm if that’s the case what can i do to solve the problem below
I’m trying to upload the license you sent me since last week base on reformatting flash process. Unfortunately I cannot transfer the tnrsys.bin to the quintum.
In the DOS ftp commands below are the issues I’m encountering
D:\Quintum\AS_AX_BX-P103-08-00>ftp 192.168.1.2
Connected to 192.168.1.2.
220 Welcome to Tenor.
User (192.168.1.2:(none)): admin
331 Password required.
Password:
230 User logged in.
ftp> bin
200 TYPE set to I.
ftp> hash
Hash mark printing On ftp: (2048 bytes/hash mark) .
ftp> prompt
Interactive mode Off .
ftp> put tnrsys.bin
200 PORT command successful.
150 Opening BINARY mode data connection.
###############################
Ø Netout :Connection reset by peer
Note: I also tried using tnrsys.bin of P102 codebase same error occurred
While in the Hyperterminal or Console below are the issue I’m encountering
Loading boot software…Version P103-08-08
+————————————————————————–+
| TENOR SOFTWARE |
| |
| (C) Copyright 1998-2006 Quintum Technologies Inc. All Rights Reserved. |
| |
| Hardware ID: 0011 (3) |
| |
+————————————————————————–+
Loading software: Length = 3520647, Checksum = 0x24a5. Please wait…
TENOR>ftp -c
TENOR\FTP> Tenor’s LAN IP address? [0.0.0.0] 192.168.1.2
TENOR\FTP> LAN’s subnet mask? [255.255.255.0]
TENOR\FTP> Default gateway address? [192.168.1.1]
————————————————————————–
NETWORK PARAMETERS:
IP address is 192.168.1.2.
Subnet mask is 255.255.255.0.
Default gateway is 192.168.1.1.
————————————————————————–
TENOR\FTP> (M)odify any of this or (C)ontinue? C
TENOR>ftp
Receiving data .bad tcp checksum, received anyway
bad tcp checksum, received anyway
bad tcp checksum, received anyway
bad tcp checksum, received anyway
bad tcp checksum, received anyway
bad tcp checksum, received anyway