Generic selectors
Exact matches only
Search in title
Search in content
Search in posts
Search in pages

Reply To: TENOR & DNIS

#25433
Gonzo
Guest

This is from the manual. Are you trying to do pinless on a prepay operation?

Prompt Level: config pstntg 1# and config pbxtg 1#
Syntax: ivrtype {0 | 1 | 2 | 3 | 4 | 5 | 6 | 9}

1 Provides 2nd Dial Tone
2 Pre-paid Calling Card
3 Post-paid Calling Account – Type 0
4 ANI Authorization – Type 1
5 ANI Authorization – Type 2
6 Post-paid Calling Account – Type 1

9 ANI Authorization – Type 3

Guidelines: Typically, you would have the Trunk Group’s passthru set to “no” for IVR applications.
• If you set this option to 1 (2nd Dial Tone), the Tenor will authenticate PIN entries
against the value set in the pincode field. A RADIUS Server is not required for
this ivrtype, the Tenor provides the Authentication & Authorization in this case.
o The difference between Type 1 and Type 2 is that in ANI Type 1
(ivrtype = 4), when a match is not found on the RADIUS Server for an
ANI, the call is disconnected. In other words, the ANI must be known by
the RADIUS Server to place a call. In ANI Type 2 (ivrtype = 5), if the
ANI does not match, the caller may manually enter in the Account
Number, so that calls can be made, no matter what location the caller is
calling from.
For ANI Type 3 (ivrtype = 9) incoming calls over PRI, the ANI is passed
to the RADIUS Server for Authentication and Authorization, and when
successful, the call is connected automatically to a destination based on
the DNIS, but determined by the RADIUS Server. If the setup message
does not include both the ANI & the Called Number, the call will be
rejected.
Examples: config pstntg 1# ivrtype 2 – Sets the ivrtype to Prepaid Calling Card.
Related Cmds: pincode, ivraccessnumber, ivranswerdelay, ivraccountlength, ivrpinlength,
ivrcardlength, ivrlanguage, ivrlangtype, multisession, retrycounter
NOTE
See the RADIUS/IVR Chapter of Section IX (9) for an
“IVR Quick-Start Guide” or the RADIUS Developer’s
Guide (downloadable from the Customer Service
section of http://www.quintum.com) for many more details
regarding these processes.
• If you set this option to 2 (Pre-paid Calling Card), you will have the option to set
the card length (ivrcardlength), and to choose the Language for the IVR
Prompts played on this TG (ivrlanguage). .
• If you set this option to 3 or 6 (Post-paid Calling Card Types 0 & 1), you will
have the option to set the account length and the PIN length (ivraccountlength
& ivrpinlength), and to choose the Language for the IVR Prompts played on
this TG (ivrlanguage).
o The difference between Type 0 and Type 1is that Type 0 (ivrtype = 3)
sends the Account Number and PIN in 2 separate fields to the RADIUS
server and Type 1 (IVRType = 6) is interoperable with RADIUS Servers
which accept those 2 pieces of information together in one field.
If you set this option to 4, 5 or 9 (ANI Authorization Types 1, 2 or 3), the Tenor
will transmit the ANI of the Calling Party to the RADIUS Server for “automatic”
authorization to place calls.