Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Reply To: Your opinion about Quintum?

MikeM to Shayan


If you are talking about the IP address where the tenor will send calls to, the destination IP address, this can be found in the

config be prompt. If you do a print there, you should see at least 1 static route prompt. The static route prompt are where you configure the term points. Each sr prompt can be configured with one destination IP address. So if you see static route 1, you can go to static 1 and print there and see where the IP address is.

There is also a Command Line Reference guide available for the A800 on Quintum’s web site where you can look up static route for more help.