Free Erlang traffic calculators

The world's first online Erlang traffic calculators

Telecom Traffic Online
  Home | Free calculators | Products | Tech. papers | Forum | About us
A-Z termination - click here
A-Z termination - CLICK HERE
VoIP bandwidth calculator
  • VoIP softswitch

    DUAL Softswitch is a complete Voice over IP switching and billing solution.  Flat monthly rate.

    Web control panels; Least Cost Routing; Excel tariff uploads; SIP and H323 support.

    H323 SIP softswitch >>

  • VoIP calling

    Premium quality termination for wholesale carriers with their own VoIP switch.

    44Direct >>

    Our lowest rates for wholesale carriers with their own VoIP switch.

    44Mobile >>

    Our unique online callshop billing system.

    Bill My Calls >>

CDMA network Performance Indicators

Wallis Dudhnath - 14th October 2017  (16:28 GMT)

Hi Davia,

RBS 6102 works with -48V DC. 57V will cause damage.

VBR/ Wallis Dudhnath

PS: Thanks Munshie for your comments

mushie - 13th October 2017  (22:05 GMT)

Hello Mr. Wallis,
I would like to thank you for your reply and apologise for my late answer. Your reply was of great help to me. Thanks a lot.

Davia - 12th October 2017  (10:22 GMT)

I want to know the maximum DC supply voltage of a DUG in a RBS 6102 Ericsson, can it withstand 57VDC without damage?

Wallis Dudhnath - 19th September 2017  (12:54 GMT)

Hi Mushie,

It starts with a detailed Root Cause Analysis of this issue or issues that you are focusing on. As an example you mentioned "Called Part Busy" and we need to see is this Network Busy (lack of Network resources) or is Party B busy and on a call.

First port of call is to look at the Network setup and see how the Network is performing during the "Busy Hour" period or periods. This will help to see if you need more capacity in your Network. Does the Signalling, Switches, IP/MPLE(-TE / -TP), Radio Network, etc.. need further capacity. Next step is to look at what Software Features are activated and see if any Licenses will need to be increased, etc.. Basically, an Audit will be required and this will help a plan of action to be formulated. In the past I experienced major issues with call setup. From the Audit it pointed to issues with the Transmission / Optical Network. A capacity expansion (MPLS increase) helped to remedy the issue.

RF planning may also be required to ensure that you have available resources in "congested" areas.

Look forward to your response.

VBR/ Wallis Dudhnath

Mushie - 17th August 2017  (14:02 GMT)

Hello, Please i need help on the following indicators as far as a calling process is concerned: premature releases before and after ringing, TCH assignment failures, called party no reply, other failures before and after connection, early releases before paging, mobile subscriber unreachable, called party busy. factors influencing them and how they can be improved. Thanks in advance for your help,

Post a reply to this article

Name Enter your name.
Message Enter your message.
Email Optional -  If you enter your email address in this box, then you will automatically be notified if anyone replies to your message.  Your email address will only be published if you pay to post this message.
Please confirm you are human.
Press the button to post your message.
Home | Free online calculators | Products | Technical papers | Forum | Contact us | About us

Last modified: 17 May 2017

Copyright 2017. All rights reserved.