Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Ericsson RBS fault code decoder

Viewing 15 posts - 1 through 15 (of 48 total)
  • Author
    Posts
  • #62656
    kishore
    Guest

    Hi, Iam currently working on Ericsson Telecom products.
    I just want to know that if there is any auto program that would give the A3 alarm details just by feeding RXMFP printouts in the BSC.

    This is applicable to Ericsson RBS 2964 / 2954 / 2204 / 2206 / 2202 / 2111 / 2308

    Can anybody pls help me out in this to avoid the manual interpretation of fault codes.

    #62657
    mohan
    Guest

    sir plz give reply…

    #62658
    rahul
    Guest

    what is the use of fault dicoder

    #62659
    Alex
    Guest

    You could make a script to translate the faut code when you execute the RXMFP

    BR
    Alex

    Where a list:
    RXOCFFC1A0 Reset, failed restart attempt
    RXOCFFC1A1 Reset, power on
    RXOCFFC1A10 Indoor temperatu out of safe range
    RXOCFFC1A12 DC voltage out of range
    RXOCFFC1A14 Local bus fault
    RXOCFFC1A15 RBS database corrupted
    RXOCFFC1A16 RU database corrupted
    RXOCFFC1A17 HW and IDB inconsistent
    RXOCFFC1A18 Internal configuration failed
    RXOCFFC1A19 Indoor temperatur above safe range
    RXOCFFC1A2 Reset, switch
    RXOCFFC1A20 Indoor temperatur below safe range
    RXOCFFC1A3 Reset, SW fault
    RXOCFFC1A4 Reset, watchdog
    RXOCFFC1A5 Reset, RAM fault
    RXOCFFC1A6 Reset, internal function change
    RXOCFFC1A7 X bus fault
    RXOCFFC1A8 Timing unit VCO fault
    RXOCFFC1A9 Timing bus fault
    RXOCFFC1B4 L/R SWI (BTS in local mode)
    RXOCFFC1B5 L/R TI (Local to remote while link lost)
    RXOCFFC2A0 Reset, failed restart attempt
    RXOCFFC2A1 Reset, power on
    RXOCFFC2A10 DXU optional EEPROM checksum fault
    RXOCFFC2A11 ALNA fault
    RXOCFFC2A12 RX maxgain/mingain violated
    RXOCFFC2A13 Timing unit VCO ageing
    RXOCFFC2A14 CDU supervision/comunication lost
    RXOCFFC2A15 VSWR/Output power supervision lost
    RXOCFFC2A16 Indoor temperature out of normal conditional range
    RXOCFFC2A17 Indoor humidity
    RXOCFFC2A18 DC voltage out of range
    RXOCFFC2A19 Power system in stand-alone mode
    RXOCFFC2A2 Reset, switch
    RXOCFFC2A20 External power fault
    RXOCFFC2A21 Internal power capacity reduced
    RXOCFFC2A22 Battery backup capacity reduced
    RXOCFFC2A23 Climate capacity reduced
    RXOCFFC2A24 Coolor capacity reduced
    RXOCFFC2A25 Heater capacity reduced
    RXOCFFC2A26 Climate sensor fault
    RXOCFFC2A27 System voltage sensor fault
    RXOCFFC2A28 A/D converter fault
    RXOCFFC2A29 Varistor fault
    RXOCFFC2A3 Reset, watchdog
    RXOCFFC2A30 Local bus fault
    RXOCFFC2A31 High-frequency software fault
    RXOCFFC2A32 Non-volatile memory corrupted
    RXOCFFC2A33 RX diversity lost
    RXOCFFC2A34 Output voltage fault
    RXOCFFC2A35 Optional synchronisation source
    RXOCFFC2A36 RU database corrupted
    RXOCFFC2A37 Circuit breaker tripped
    RXOCFFC2A38 Default values used
    RXOCFFC2A39 RX cable disconnected
    RXOCFFC2A4 Reset, SW fault
    RXOCFFC2A40 Reset, DXU link lost
    RXOCFFC2A41 Lost communication to TRU
    RXOCFFC2A42 Lost communication to ECU
    RXOCFFC2A43 Internal configuration failed
    RXOCFFC2A44 Indoor temperature above normal conditional range
    RXOCFFC2A45 Indoor temperature below normal conditional range
    RXOCFFC2A46 IDB parameter fault
    RXOCFFC2A47 Auxiliary equipment fault
    RXOCFFC2A5 Reset, RAM fault
    RXOCFFC2A6 Reset, internal function change
    RXOCFFC2A7 RXDA A/B amplifier current fault
    RXOCFFC2A8 VSWR limits exceeded
    RXOCFFC2A9 Power limits exceeded
    RXOCFFC2B10 MAINS FAIL (External power source fail)
    RXOCFFC2B11 ALNA/TMA Fault
    RXOCFFC2B12 ALNA/TMA Degraded
    RXOCFFC2B13 Auxiliary Equipment Fault
    RXOCFFC2B7 DIP A (PCM link A lost)
    RXOCFFC2B9 RBS door (RBS cabinet door open)
    RXOCFRU0 DXU
    RXOCFRU1 ECU
    RXOCFRU10 ACCU
    RXOCFRU11 Active cooler
    RXOCFRU12 ALNA A
    RXOCFRU13 ALNA B
    RXOCFRU14 Battery
    RXOCFRU15 Fan
    RXOCFRU16 Heater
    RXOCFRU17 Heat exchanger external fan
    RXOCFRU18 Heat exchanger internal fan
    RXOCFRU19 Humidity sensor
    RXOCFRU2 Micro RBS
    RXOCFRU21 Temperature sensor
    RXOCFRU22 CDU HLOUT HLIN cable
    RXOCFRU23 CDU RX in cable
    RXOCFRU24 CU
    RXOCFRU25 DU
    RXOCFRU26 FU
    RXOCFRU27 FU CU PFWD cable
    RXOCFRU28 FU CU PREFL cable
    RXOCFRU29 CAB HLIN cable
    RXOCFRU30 CDU bus
    RXOCFRU31 Environment
    RXOCFRU32 Local bus
    RXOCFRU33 Power communication loop
    RXOCFRU34 RX antenna A
    RXOCFRU35 RX antenna B
    RXOCFRU36 Timing bus
    RXOCFRU37 TX antenna A
    RXOCFRU38 RX antenna B
    RXOCFRU39 X bus
    RXOCFRU40 Antenna
    RXOCFRU5 CDU
    RXOCFRU6 BFU
    RXOCFRU7 PSU
    RXOCFRU8 CDU_Cos
    RXOCFRU9 BDM
    RXOCONFC1B8 LAPD Q CG (LAPD Queue Congestion)
    RXOCONFC2B8 LAPD Q CG (LAPD Queue Congestion)
    RXORXFC1A0 RXDA Amplifier Current Fault
    RXORXFC1A1 ALNA/TMA Fault
    RXORXFC1A10 RX Indication Fault
    RXORXFC1A11 CDU Output Voltage Fault
    RXORXFC1A12 TMA CM Output Voltage Fault
    RXORXFC1A3 RX EEPROM Checksum Fault
    RXORXFC1A4 RX Config Table Checksum Fault
    RXORXFC1A47 RX Auxiliary Equipment Fault
    RXORXFC1A5 RX Synthesizer A/B Unlocked
    RXORXFC1A6 RX Synthesizer C Unlocked
    RXORXFC1A7 Astra Dixie Communication Fault
    RXORXFC1A8 RX Internal Voltage Fault
    RXORXFC1A9 RX Cable Disconnected
    RXOTFFC1A0 Optional Synchronization Source
    RXOTFFC1A1 DXU-out EEPROM Checksum Fault
    RXOTFFC1B0 EXT SYNCH (No Usable Esternal Reference)
    RXOTFFC1B1 PCM SYNCH (No Usable PCM-Reference)
    RXOTFFC2B0 EXT SYNCH (No Usable Esternal Reference)
    RXOTFFC2B1 PCM SYNCH (No Usable PCM-Reference)
    RXOTRXFC1A0 Reset, failed restart attempt
    RXOTRXFC1A1 Reset, power on
    RXOTRXFC1A10 Tora Dannie communication fault
    RXOTRXFC1A11 DSP CPU communication fault
    RXOTRXFC1A12 Terrestrial traffic channel fault
    RXOTRXFC1A13 RF loop test fault
    RXOTRXFC1A14 RU database corrupted
    RXOTRXFC1A15 X bus communication fault
    RXOTRXFC1A16 Initiation fault
    RXOTRXFC1A17 X-interface fault
    RXOTRXFC1A18 DSP fault
    RXOTRXFC1A19 Reset, DXU link lost
    RXOTRXFC1A2 Reset, switch
    RXOTRXFC1A20 HW and IDB inconsistent
    RXOTRXFC1A21 Internal configuration failed
    RXOTRXFC1A3 Reset, watchdog
    RXOTRXFC1A4 Reset, SW fault
    RXOTRXFC1A5 Reset, RAM fault
    RXOTRXFC1A6 Reset, internal function change
    RXOTRXFC1A8 Timing reception fault
    RXOTRXFC1A9 Signal processing fault
    RXOTRXFC2A0 RX cable disconnected
    RXOTRXFC2A1 RX EEPROM checksum fault
    RXOTRXFC2A10 TX internal voltage fault
    RXOTRXFC2A11 TX high temperature
    RXOTRXFC2A12 TX output power limits exceeded
    RXOTRXFC2A13 TX saturation
    RXOTRXFC2A14 Voltage supply fault
    RXOTRXFC2A15 VSWR/output power supervision lost
    RXOTRXFC2A16 Non-volatile memory corrupted
    RXOTRXFC2A18 DSP fault
    RXOTRXFC2A19 High frequency software fault
    RXOTRXFC2A2 RX configuration table checksum fault
    RXOTRXFC2A20 RX initiation fault
    RXOTRXFC2A21 TX initiation fault
    RXOTRXFC2A22 CDU bus communication fault
    RXOTRXFC2A23 Default values used
    RXOTRXFC2A25 TX maximum power restricted
    RXOTRXFC2A3 RX synthesizer unlocked
    RXOTRXFC2A4 RX internal voltage fault
    RXOTRXFC2A5 Astra Dixie communication fault
    RXOTRXFC2A6 Astra Tracy communication fault
    RXOTRXFC2A7 TX EEPROM checksum fault
    RXOTRXFC2A8 TX configuration table checksum fault
    RXOTRXFC2A9 TX synthesizer unlocked
    RXOTRXRU0 TRU
    RXOTRXRU10 CDU to TRU PFWD cable
    RXOTRXRU11 CDU to TRU PREFL cable
    RXOTRXRU12 CDU to TRU RXA cable
    RXOTRXRU13 CDU to TRU RXB cable
    RXOTSFC1B3 TRA/PCU (Remote Transcoder/PCU Com. Lost)
    RXOTXFC1A0 TX Offending
    RXOTXFC1B0 CU/CDU Not Usable
    RXOTXFC1B1 CDU/Combiner VSWR Limits Exceeded
    RXOTXFC1B10 Astra Tracy Communication Fault
    RXOTXFC1B11 TX Internal Voltage Fault
    RXOTXFC1B12 TX High Temperature
    RXOTXFC1B13 TX Outpu Power Limits Exceeded
    RXOTXFC1B14 TX Saturation
    RXOTXFC1B17 TX Indication Fault
    RXOTXFC1B18 CU/CDU HW Fault
    RXOTXFC1B19 CU/CDU SW Load/Start Fault
    RXOTXFC1B2 CDU Output Power Limits Exceeded
    RXOTXFC1B20 CU/CDU Input Power Fault
    RXOTXFC1B21 CU/CDU Park Fault
    RXOTXFC1B22 VSWR/Output Power Supervision Lost
    RXOTXFC1B23 CU/CDU Reset, Power On
    RXOTXFC1B24 CU/CDU Reset, Communication Fault
    RXOTXFC1B25 CU/CDU Reset, Watchdog
    RXOTXFC1B26 CU/CDU Fine Tuning Fault
    RXOTXFC1B27 TX Max Power Restricted
    RXOTXFC1B28 CDU High Temperature
    RXOTXFC1B29 SCU Voltage Supply Fault
    RXOTXFC1B4 TX Antenna VSWR Limits Exceeded
    RXOTXFC1B47 TX Auxiliary Equipment Fault
    RXOTXFC1B6 TX EEPROM Checksum Fault
    RXOTXFC1B7 TX Config Table Checksum Fault
    RXOTXFC1B8 TX Synthesizer A/B Unlocked
    RXOTXFC1B9 TX Synthesizer C Unlocked
    RXOTXFC2A1 TX Diversity Fault
    RXORXFC2A1 RX Path loss on A receiver side
    RXOTRXFC2A39 RX Cable disconnected

    #62660
    Rômulo
    Guest

    2a-9 alarm ?

    #62661
    EDEM STANLEY
    Guest

    Hi, all
    I have an issue to resolve on tma-cm-03 with rbs config 6+6+6, alarm description output voltage fault(the alna/tma voltage has been detected outside allowed range. please advise on what to do, have tried all current range but it still having 0ne led per sector down.

    #62662
    cy
    Guest

    i have an alarm on my rbs (2a-1 RX EEPROM Checksum Fault) i have replaces all parts in with where the alarms is coming from. how do i clear this alarm/

    #62663
    Sridharan
    Guest

    TRXC :2A-1 (RX eeprom cheksum fault)
    The data stored in RXU eeprom is corrupted. This data is needed by TRU SW to perform internal configuration. Probably a HW fault in TRU. Try to power off/on TRU before replacing it. TRXC I2A:1

    #62664
    amit
    Guest

    Any buddy can tell me the web site from where I can down load the software (MO Tracker).
    (MO TRACKER, it display the cell, BCCH etc on mobile screen.)

    #62665
    Abdul-swamad Fadhili
    Guest

    Can anyone illustrate to me which threshold will the ericsson bts issue the battery discharge alarm to the repective BSC?

    #62666
    Rajdeep
    Guest

    What is the actual reason for alarm

    CF 2A – 69 (RBS 6202)

    #62667
    akhilesh chaturvedi
    Guest

    any one tell me which point test in RX diversity alarm

    #62668
    elijah osiemo
    Guest

    fault code 2a
    6 Astra-tracy communication fault in reference to rxotrx= what does it represent?

    #62669
    Charles
    Guest

    VSWR limit exceeded….can any one confirm the best solution and proper tests for this

    #62670
    OLUSOLA
    Guest

    I AM HAVING A T147 FAULT CODE ON THE 900BAND OF RBS6102.
    WHAT IS THE CAUSE OF THE PROBLEM?

Viewing 15 posts - 1 through 15 (of 48 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.