Free Erlang traffic calculators

The world's first online Erlang traffic calculators

Telecom Traffic Online
  Home | Free calculators | Products | Tech. papers | Forum | About us
A-Z termination - click here
A-Z termination - CLICK HERE
VoIP bandwidth calculator
  • VoIP softswitch

    DUAL Softswitch is a complete Voice over IP switching and billing solution.  Flat monthly rate.

    Web control panels; Least Cost Routing; Excel tariff uploads; SIP and H323 support.

    H323 SIP softswitch >>

  • VoIP calling

    Premium quality termination for wholesale carriers with their own VoIP switch.

    44Direct >>


    Our lowest rates for wholesale carriers with their own VoIP switch.

    44Mobile >>


    Our unique online callshop billing system.

    Bill My Calls >>

Immediate Assignment Reject

RITESH - 29th September 2018  (13:46 GMT)

L3RR_IMMEDIATE_ASSIGNMENT_REJEC

Pix - 27th May 2007  (16:16 GMT)

Hi Rajiv,

Yes, it can happen that a cell has a weird behaviour at some point, and needs to be restarted.

Actually, every time one measures a sudden change of QoS, the first step to do is to reset TRMs and the SUM, and possibly the TCU at BSC side.. Just to rule out a possible software failure and not spend too much time trying to find a logical cause to the problem :)

Rajiv Gujral - 27th May 2007  (10:54 GMT)

Hi Pix,

My problem is solved after giving hard reset to the BCCH TRM. Also this problem was arised because of the cell break tht comes because of the media flicks couple of days back. IS this happens in ur network also.

Pix - 26th May 2007  (11:58 GMT)

Hello,

immediate assignment reject is caused by sdcch congestion : if no SDCCH resource is availble in the BTS, the BSC sends an immediate assignment reject.

Can you give, at the busy hour, the following QOS indicators:

1. nb of SDCCH requests
distribution of types of sdcch requests (loc upd, ms orig, ms term, sms, etc.)
2. nb of SDCCH rejected due to congestion
3. nb of SDCCH allocated
4. SDCCH erlang at busy hour
5. SDCCH capacity of the cell

Regards,

Rajiv Gujral - 26th May 2007  (10:23 GMT)

Dear All,

Im facing high SDCCH Allocation and Assignment Failure in one cell. In the trace im getting "Immediate Assgnment Reject". There is no SD congestion or over flow in that cell. Please if anyone can let me know with the reason why it happens and whats the solution for it.

Post a reply to this article

Name Enter your name.
Message Enter your message.
Email Optional -  If you enter your email address in this box, then you will automatically be notified if anyone replies to your message.  Your email address will only be published if you pay to post this message.
Verification
Please confirm you are human.
Press the button to post your message.
Home | Free online calculators | Products | Technical papers | Forum | Contact us | About us

Last modified: 17 May 2017

Copyright 2017. All rights reserved.