Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

TEST SYSTEM in AXE10

Viewing 15 posts - 1 through 15 (of 37 total)
  • Author
    Posts
  • #36164
    Nguyen
    Guest

    Hi all,

    You may know that in AXE10 we can use TEST SYSTEM command to do many thing, such as to trace subscriber etc. However using this command is danger and this may cause the system to stop working. If you have any experience on this matter, plz kindly advise.

    Thanks

    #36165
    rxcmoo
    Guest

    Hi Nguyen,
    I work with AXE10 test system. If there is anything in particular you want to know, I may be able to help.
    Reply with your mail address and I will contact you.

    #36166
    Nguyen
    Guest

    Hi rxcmoo,

    Thank you for your reply. Could you pls tell me, how to use test system to trace the subscriber in the AXE10 system.

    My email is vndnguyen@hopthu.com

    #36167
    need to know
    Guest

    rxcmoo need to know all about axe10
    specialy codes etc..

    #36168
    Aliyu
    Guest

    Hi rxcmoo,
    Nguyen just asked the question i had in mind. kindly bring me into the picture. my email is
    aaboki2@yahoo.com

    #36169
    agentorange
    Guest

    pls include me, jjabello@smart.com.ph

    #36170
    sheetanshu
    Guest

    Hi rxcmoo,

    can you send me some info abt the counter values etc too. My id is sheetanshu.yadav@hutchindia.com

    #36171
    prabhakar verma
    Guest

    i think.. if you are doing the testing on a live network you could jepodise the whole network.. Pls refrain yourself from doing so.. as you might all land up job less..
    If you guys are so interesed then you can go through the EC/AC correction manual for reference and in no way can you work with counters without having a knowledge of the System(plex).

    #36172
    Buster
    Guest

    Hi rxcmoo,

    can you send me some info abt the counter values etc too. My id is kokwoo@singnet.com.sg

    Thanks

    Buster

    #36173
    johnson
    Guest

    Hi rxcmoo,
    could you send me some info about Test System of AXE-10.I want to know how to trace the subscriber in the AXE10 system and find the cellid immediately .

    Thanks a lot ,my email is johnsonwang_ls@hotmail.com.

    #36174
    Sameer
    Guest

    Hi all,
    How can I release call in progress on a particular device, BLODI only blocks it till the call ends ?

    Can I get info about the counter values mentioned too.

    Thanks & Regards,
    Sameer

    #36175
    Scot
    Guest

    Use CWSNI:IMSI=…; Command to TEAR DOWN AN ACTIVE CALL.

    Rgds

    #36176
    axe10 user
    Guest

    Hi rxcmoo,

    Can you also send me info about AXE10 test system.

    My email is edwin7@graffiti.net

    #36177
    axe10 user
    Guest

    Hi rxcmoo,

    Can you also send me info about AXE10 test system.

    My email is edwin7@graffiti.net

    #36178
    Sameer
    Guest

    Thanks Mr.Scot.

    Can you please mail me more info on

    Hope to hear from you soon.

    With Regards,
    Sameer

Viewing 15 posts - 1 through 15 (of 37 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.