Hi Subhakanta jena
Good Rx level and bad Rx quality is due to interference as know in GSM/LTE or pollution in WCDMA systems;
the latter is due to many servers having almost the same signal strengtht without any being significantly dominant compared to the others (usually more than 5 radiolinks) and all of them being low.
to fix it you just need to create a dominant server thanks to physical actions on site and neighbors. Also make sure radio parameters are not incriminated (wrong location/mobility parameters like CIO,Qoffset,...)
Subhakanta jena - 10th October 2017 (12:30 GMT)
If Rx level is good but Rx quality is bad.Then what is the reason behind it and how to solve this.Also plz give some idea about pilot pollution
rakesh patel - 9th July 2016 (05:58 GMT)
MAMAD SAED - 26th November 2013 (07:27 GMT)
IN THE HUAWEI HAVE( TCH ass FR ) TO SOLVE THIS CAN YOU HELP ME WHATS YOUR SOLUTION?
pix - 4th November 2013 (18:49 GMT)
.REDUCE DOWNLINK TX POWER.
MAMAD.SAED - 4th November 2013 (10:49 GMT)
RX- QUALITY (UP LINK ) LOW . SOLOUTION .PLEASE HELP ME
Ashvaan sheik - 30th November 2012 (18:56 GMT)
some sites can overshoot above 5kms also
so check it out.. Check coverage level.. if there is a lake or river near by then interference occurs due to TIR..check whether nieghbours are properly defined.. there can be a problem of handover failures,,, or change the orientation little bit.. then do post drive and observe..
Alexia - 12th August 2010 (20:37 GMT)
with SFH normally you can have bad rx quality but the SQI is good and the customers can hear each other well. which problem do you really face??
Arvind - 12th August 2010 (13:50 GMT)
issue is with hopping frquencies,checked with HSN and MAIO plan.
Mania - 9th August 2010 (06:06 GMT)
When you say RXQuality issue, do you mean bad RX Qual in field / in HO Stats on in RMS stats, Please clarify.
In any case is it effecting one radio / one band / all hopping etc, pls specify which is worst hit. check from frequency point of view.