Use this free Configuration Wizard to automatically configure your SPA8000 8 port VoIP adapters gateways to work with Bill My Calls.

• Pick a booth

  

• Getting started

  The first step in getting your online call shop billing service is to sign-up for an account online

  Account sign-up >>

• Control panels

  Once you have an account, click on the link below to sign in to your online call shop billing system.

  Log-in to your biller >>

On the next page, you will see special link.  When you click on the link, your adapter will download a new configuration from our system.

Please note the following:

• Your gateway must be switched on, and its web interface must be reachable from your computer.
• If your adapter has been locked by another provider, this wizard will not unlock it.
• This wizard will not lock your gateway or change its passwords.
• The Line IDs will be set to "1" and "2" to ensure compatibility with our billing systems.
• We recommend that you use this wizard, but manual settings are also available.

	IP address Enter the IP address that you use to reach your PAP2 (eg. 192.168.0.2). ** Account number Enter your Bill My Calls account number. Password Enter your Bill My Calls password. Press the button to continue.

**  If you do not know the local IP address of your adapter, you can find it out easily by following these steps:

1. Connect a telephone to port 1 of the adapter.
2. Dial "****" on that telephone.  You should hear a "configuration menu" prompt.
3. Dial "110#" on the telephone.  The voice prompt should play out the adapter's IP address.